Xbox Control Via Usb
It is a xbox controller for the pc for the gamers out there.
Be Prepared
Before you do this you need:
A 2.0 USB port
Solder
Xbox 1 contorler or 360
500mhz computer with 64mb of ram
Xbcd Software
Also If you are using the XBOX 1 controler you need to download
XBCD from www.allenthinks.com in the download section.
Download The XBCD software
If you are Using Xbox 1 controller you need to download the XBCD
(custom) from allenthinks.com in the download section.
If and only if you are using the XBOX 360 controller.
Wiring It Up
Now you need to splice the adapter THE ADAPTER not the xbox
cable. (some problems)
And it is the same wiring diagram as a normal usb cable.
You don’t need to worry about the yellow cable just cut it off.
Installing
Now its time to install the software FIRST.
This part is a little rag-tag.(windows on different os”XP,2000,95″)
Once you have the software installed plug up the controller and
when windows recognizes it chose manual install and then select
choose myself(or something like that) and select the controller
and it will say that its not digitaly signed but who cares.
Checking your connections
In order to connections and if you installed it correct open up
the XBCD Utility and select gamepad1 (or similar) then open up
Microsoft’s game controllers and check.
Then open up your fav game and map the controls.
