Covert Security System Hidden inside Garden Lamps Covert Drošības sistēma paslēpies Dārza lampas

security-cam22

All you need to make your own DIY security system with hidden outdoor cameras is the garden lamp housing, network cables, screws, and of course Viss, kas Jums nepieciešams, lai izveidotu savu DIY drošības sistēma ar slēpto āra kamerām ir dārza lampas korpuss, tīkla kabeļi, skrūves, un, protams, the  IP cameras Thea IP kameras which you will put up to keep a track of what is happening outside. kurām jūs safasēti turēt līdzi, kas notiek ārpus tās. Today we will tell you how to can prepare such a camera on your own to build a DIY security network. Šodien mēs Jums pastāstīs, kā var sagatavot šādu kameru uz savu veidot Diy drošības tīklu.

You may also enjoy our similar posts: Jūs varat arī izmantot mūsu līdzīgs posts:

How to build your own: Kā veidot savu:

Once you have all your materials, you need to remove the reflector from the dome. Kad esat visiem jūsu materiāliem, jums nepieciešams izņemt atstarotāja no dome. You will find that the reflector is attached with screws on both sides. Jūs redzēsiet, ka atstarotājs ir piestiprināta ar skrūvēm abās pusēs. Simply unscrew the screws and open the reflector. Vienkārši atskrūvēt skrūves un atveriet atstarotājs. Next, Remove the rubber seal from between the holder as you will need to place the camera in between that and attach it with the cable.  If you'd like, you can check the Pēc tam izņemiet gumijas blīvējumu no starp īpašnieku, Jums būs nepieciešams novietot kameru starp šo un piestipriniet to ar cable. Ja vēlaties, jūs varat pārbaudīt full project details pilnīga informācija par projektu here. šeit.

Getting things ready for use Iegūt lietas gatavs lietošanai

  • Prepare the tube with the help of the screw as the cables have to pass from inside the tube so they're safely hidden. Sagatavot caurule ar palīdzību skrūves kā kabeļi ir pāriet no iekšpuses cauruli tā, viņi droši paslēpta. A hole needs to be made in the tube from where the wires can come out for connectivity purpose. Caurums ir jāveic caurule no kurienes vadi var iznākt savienojamība mērķim. This hole should be a little large so that it is large enough to pass the power connector of the camera.  Note, we sell several types of Šis caurums ir mazliet lielu, lai tā ir pietiekami liela, lai nodotu power connector no camera. piezīmi, mēs pārdodam vairāku tipu security webcams in our store drošības videokameru mūsu veikalu than can be adapted for this project. kā var pielāgot šo projektu.
  • While connecting the wires be vary careful not to cut the colored wires.  After the garden light has been prepared, the power adapter needs to be connected. Kamēr savieno vadus var atšķirties uzmanīgiem, samazināt krāsainās wires. Pēc dārza gaismas, ir sagatavoti, adapteri nepieciešams pievienot. Find the positive and the negative connection and then attach the wires to the camera. Atrast pozitīvo un negatīvo savienojumu un pēc tam pievienot vadus kameru. Always try to use the RJ45 power connector as this is the safest connector for such a project. Vienmēr mēģiniet izmantot RJ45 power connector, jo tas ir drošākais savienotājs šādam projektam.

Finally Beidzot the camera kameras needs to be mounted and attached and your IP security system is ready for use. ir uzstādīta un pievienota, un jūsu IP drošības sistēma ir gatava lietošanai. You can monitor various areas outside your home.  There are plenty of  software available which can be used to check multiple cameras from your computer. Jūs varat uzraudzīt dažādās jomās, kas atrodas ārpus jūsu home. Ir daudz kādu teksta apstrādes programmu pieejamu programmatūru, kuru var izmantot, lai pārbaudītu vairākām kamerām no sava datora.

Comment: Komentārs: