DIY Midi Drums using an Arduino DIY Midi एक Arduino का उपयोग कर ड्रम

drumsdrum-kit

Using some का प्रयोग कुछ piezo sensors piezo सेंसर , this DIYer created some DIY midi drums for the इस DIYer कुछ के लिए DIY MIDI ड्रम बनाया Arduino Arduino . .  All it takes is a handful of the sensors and a few resistors to put together. सभी इसे लेता है सेंसरों की एक मुट्ठी भर है और कुछ प्रतिरोधों को एक साथ रखा है.  He's already assembled the soruce code, parts kit and वह पहले से ही soruce कोड, भागों किट और इकट्ठे है detailed instructions विस्तृत निर्देश so you can easily make one yourself. ताकि आप आसानी से अपने आप को एक बना सकते हैं.   The piezo sensors can be used as buzzers but at the same time can also detect “knocks” or vibrations. Piezo सेंसर buzzers के रूप में इस्तेमाल किया जा सकता, लेकिन एक ही समय में यह भी पता लगा सकता हूं दस्तक देता है "या कंपन.  When you strike each drum pad, a voltage is generated based upon your impact force. जब आप हड़ताल एक पैड ड्रम, एक वोल्टेज उत्पन्न अपने प्रभाव बल पर आधारित है.

Here are the basic materials you need to make your own Midi drum: यहाँ मूल सामग्री आप अपने स्वयं के बनाने के Midi ढोल की जरूरत हैं:

  1. Wire to connect piezos (speaker style wire is OK) Piezos तार जोड़ने के लिए (वक्ता शैली तार ठीक है)
  2. Foam/mousepad फोम mousepad /
  3. Auto body thin metal sheet ऑटो शरीर धातु की पतली शीट
  4. Spray glue & epoxy (or hot glue) स्प्रे गोंद और (या गर्म गोंद epoxy)
  5. Solder मिलाप
  6. Tape or heat shrink tubing टेप या गर्मी ट्यूबिंग हटना

Check out the entire tutorial and subscribe for more बाहर पूरा ट्यूटोरियल की जाँच करें और अधिक के लिए सदस्यता Arduino Arduino and और Audio ऑडियो projects. परियोजनाओं.

Comment: टिप्पणी: