12 PowerBook External Antenna 12 PowerBook विदेश एंटीना

Everyone knows Powerbooks have terrible wi-fi reception. हर कोई जानता है Powerbooks भयानक WI-Fi का स्वागत किया है. Unfortunately, only 15″ and 17″ Powerbooks facilitate adding your own external antenna. दुर्भाग्य से, केवल 15 'और 17 Powerbooks "अपनी बाह्य ऐन्टेना जोड़ने की सुविधा. With just a few quick cuts you can modify a 12″ Powerbook to take an external antenna as well. के साथ बस कुछ जल्दी में कटौती आप एक 12 "Powerbook एक बाहरी एंटीना लेने के लिए भी संशोधित कर सकता है.

Size up your existing antenna hookup Airport Extremes use the MC Card connector. अपने मौजूदा ऐन्टेना जोड़ने का काम हवाई अड्डे चरम अप आकार एम सी कार्ड संबंधक का उपयोग करें. You could use any आप किसी भी इस्तेमाल कर सकते हैं
antenna you want as long as you get the right pigtail for it (and the impedance matches, which I think is 50 ohms here). एंटीना के रूप में आप के रूप में आप के लिए सही बेनी मिल लंबे चाहते हैं (और प्रतिबाधा मैच है, जो मुझे लगता है कि 50 यहाँ ohms है). I opted for a 5.5db flat blade antenna ($15), but there are many other options over here: http://sharperconcepts.zoovy.com/category/24ghzantennas/ The connector coming off the existing internal antenna is going to have to be pushed back into the notch it comes out from. मैं एक 5.5db फ्लैट ब्लेड ऐन्टेना (15 डॉलर) के लिए चुना है, लेकिन वहाँ कई यहाँ पर अन्य विकल्प हैं: http://sharperconcepts.zoovy.com/category/24ghzantennas/ संबंधक बंद मौजूदा आंतरिक ऐन्टेना आ रहे है करने के लिए हो रहा है पायदान इसे बाहर से आता है में पीछे धकेल दिया. You'll quickly realize it doesn't go back far enough and obstructs the little metal flap from closing back. तुम जल्दी एहसास होगा यह अभी तक वापस जाना पर्याप्त नहीं है और वापस समापन से थोड़ा धातु प्रालंब भी नुकसान पहुँचा. We'll cut part of that flap off. हम उस प्रालंब बंद का हिस्सा काट देंगे.

Eyeball the route for the cable to travel out of the battery compartment The battery itself is another problem. केबल के लिए मार्ग नेत्र गोलक से बाहर बैटरी डिब्बे बैटरी ही की यात्रा के लिए एक और समस्या है. You'll have to cut a notch in the flat metal that sits right above the metal Airport Express flap in order to let the cable out. आपको फ्लैट धातु कि सही धातु हवाई अड्डे एक्सप्रेस प्रालंब ऊपर बैठता में जाने के लिए आदेश में एक पायदान कट होगा केबल बाहर.

Cut a notch in the Airport Extreme flap/door to let the cable out of the Airport Extreme slot Start by covering up all the little crevices and cracks with masking tape so that only the little piece of the metal flap is exposed. हवाई अड्डे चरम प्रालंब में एक पायदान कट / दरवाजा जाने के लिए टेप तो मास्किंग कि केवल धातु प्रालंब का छोटा सा टुकड़ा उजागर हो रहा है साथ बाहर हवाई अड्डे चरम स्लॉट शुरू की सभी छोटी दरारों और दरार को कवर द्वारा केबल. Take that out with a Dremel using a cutoff wheel, then blow away the filings really well with compressed air. एक Dremel एक cutoff पहिया का प्रयोग है, तो दूर बुरादा उड़ा सच के साथ अच्छी तरह से संकुचित हवा के साथ कि बाहर ले जाओ. The flap should close around the internal antenna's connector with it shoved all the way back into the notch it comes out from. प्रालंब इसके साथ आंतरिक ऐन्टेना है संबंधक लगभग बंद हो जाना चाहिए सभी तरह वापस shoved पायदान इसे बाहर से आता है में. Unfortunately, the flap probably won't stay put any longer because you just cut off the piece of metal that keeps it in place. दुर्भाग्य से, प्रालंब शायद किसी भी अब नहीं डाल रहना क्योंकि आप अभी से धातु का टुकड़ा है कि यह जगह में रहता है कट जाएगी. But that's ok. लेकिन ठीक है. Now you need to notch the battery to let the cable out. अब तुम्हें बैटरी पायदान की जरूरत जाने केबल बाहर.

Cut a notch in the battery itself If you cut a notch in the Airport Extreme flap properly, you should be able to lay the battery down on top of the cable as it snakes out. बैटरी अपने आप में एक पायदान कट यदि आप हवाई अड्डे चरम प्रालंब में एक पायदान ठीक से काटा, आप बैटरी करना केबल के ऊपर नीचे के रूप में इसे बाहर साँप सक्षम होना चाहिए. You can eyeball where you'll need to cut into the तुम नेत्र गोलक आप में कटौती कर सकते हैं, जहां की आवश्यकता होगी
battery itself, in the flat piece of metal that sticks out. बैटरी ही धातु का टुकड़ा है कि बाहर फ्लैट में चिपक जाती है. Mask the battery to prevent filings from getting in anywhere, and hit it with the Dremel using a cut-off wheel. नकाब में कहीं भी हो रही है, और यह Dremel से मारा चक्र से कट-फाइलिंग का उपयोग करने से रोकने के बैटरी.

Fit it all together Getting it all back together can be a little bit of a trick. यह फ़िट सब साथ हो रही है यह सभी को एक साथ वापस एक चाल का थोड़ा सा हो सकता है. The problem is that the original internal antenna connector juts out just a bit too much, and I feel comfortable notching neither the connector nor the part of the battery that hits it. समस्या यह है कि मूल आंतरिक ऐन्टेना बाहर संबंधक juts सिर्फ एक बहुत कुछ है, और मैं आराम से निशाना साधना न संबंधक और न ही बैटरी का हिस्सा लगता है कि यह हिट. It's so close that you can just tightly tape the connector back in it's little nook, tape the flap shut, and drop the battery down with a little bit of jiggling. यह इतने करीब है कि आप बस कस संबंधक टेप वापस कर सकते हैं यह थोड़ा नुक्कड़, टेप में प्रालंब बंद है, और बैटरी ड्रॉप झूल का थोड़ा के साथ नीचे. Voila! देखा! You've hooked up an external antenna! तुम कांटे की शकल है एक बाहरी एंटीना! Now you realize the cable is thicker than the gap under the Powerbook. अब आप महसूस केबल Powerbook के अंतर्गत अंतर से अधिक गहरा हो जाता है. You need to put new feet on the bottom that raise the whole thing up about 4mm or so. आप नीचे के नए पैरों खड़ा करने की जरूरत है कि 4mm के बारे में ऊपर या तो पूरी बात उठा.

I snagged some feet from the bottom of a Sonicwall Firewall that was being rackmounted, but you can improvise with anything that suits you, and Radioshack usually has some stick-on feet that will work. मैं एक Sonicwall Firewall के नीचे था कि rackmounted होने से कुछ फीट snagged, लेकिन आप कुछ सुधार के साथ कि आप सूट, और Radioshack आम तौर पर कुछ छड़ी है कि पैर काम करेंगे पर कर सकते हैं. Now just stick some stick-on velcro on the back of the antenna to mount it to the display. अब बस एंटीना की पीठ पर कुछ छड़ी वेल्क्रो पर छड़ी के लिए यह प्रदर्शित करने के लिए माउंट. You can substitute any antenna you want, provided it's designed for wi-fi usage. आप किसी भी ऐन्टेना विकल्प आप चाहते हैं, बशर्ते वह WI-Fi के लिए तैयार है प्रयोग कर सकते हैं. However, just about anything will perform better than the stock antenna! हालांकि, अभी कुछ भी करने के बारे में शेयर ऐन्टेना बेहतर होगा!

Comment: टिप्पणी: